
PCB & QC – TWO SYSTEMS,
ONE TARGET: EFFICIENCY
In front of the front panel control components are functionally identical. Behind it
you’ll find the differences which make life easier for your production
engineer and number work simpler for your accountant.
Quick Connect
QC contact blocks for maximum vari-
ability
When the investment for the layout and
Easy to assemble on the
printed circuit board
PCB contact blocks for high production
volumes
? If you produce your input systems in
Quick Connect version
PCB version
production of a printed circuit board
does not pay off, your best choice is our
QC contact blocks with quick connect
terminals.The contact blocks are plugged
into the actuators from behind and lock
firmly into place.
Blade terminals enable simple wiring,
without any additional devices or spe-
cial tools. The enclosed space in the
RAFIX 22 FS+ control components is
also used efficiently for the QC contact
blocks whose mounting depth including
the LED clip and cable lugs is only
27 mm.
large volumes, or
? if you use a printed circuit board for the
electronics, displays and other compo-
nents anyway, or
? if you are planning combination with
short-travel keyswitches,
RAFIX 22 FS+ with PCB contact blocks is
the only real choice.
Simply include the PCB contacts and
LEDs in the layout of the printed circuit
board and solder them during produc-
tion – just as simply as the other compo-
nents on a common printed board.
Your benefits: cost savings and reduc-
tion of assembly errors. And don’t worry
about using up space: the contact blocks
require only 9.2 mm of space between
the printed circuit board and the front
panel.
PCB version
7